View LC320WXN-SBA3_2758911.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 41 lc320wxn ver. 1.0 32.0 wxga tft lcd title model general buyer *when you obtain standard approval, please use the above model name without suffix lc320wxn *model sba3 (rohs verified) suffix lg.display co., ltd. supplier ) ) ( ( final specification preliminary specification for approval specification tv products development dept. lg. display lcd co., ltd y. d lee / engineer prepared by y. h choi / project leader reviewed by j. t kim / team leader signature date approved by please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by www..net www..net
product specification 2 / 41 lc320wxn ver. 1.0 25 mounting precautions 9-1 25 operating precautions 9-2 26 electrostatic discharge control 9-3 26 precautions for strong light exposure 9-4 26 storage 9-5 26 handling precautions for protection film 9-6 25 precautions 9 12 8 interface connections 3-2 color input data reference 3-5 24 information of lcm label 8-1 24 packing form 8-2 24 packing 8 23 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6 electrical characteristics 3-1 10 signal timing specifications 3-3 11 signal timing waveforms 3-4 13 power sequence 3-6 15 optical specifications 4 19 mechanical characteristics 5 22 reliability 6 23 international standards 7 23 safety 7-1 page item number contents www..net www..net
product specification 3 / 41 lc320wxn ver. 1.0 record of revisions final specification p8 32hd final cas v1.0 release - mar, 06, 2009 1.0 description page revision date revision no. www..net www..net
product specification 4 / 41 lc320wxn ver. 1.0 1. general description the lc320wxn is a color active matrix liquid crysta l display with an integral external electrode fluor escent lamp(eefl) backlight system. the matrix employs a-s i thin film transistor as the active element. it is a transmissive type display operating in the normally black mode. it has a 31.51 inch diagonall y measured ac ti v e d is p la y a r ea w ith w xg a r es o lut i on ( 768 ve r t i c a l b y 1366 hor izontal pixel arr ay). each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical strip es. gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for ea ch dot, thus presenting a palette of more than 16.7m(true) colors. it has been designed to apply the 8-bit 1-port lvds interface. it is intended to support lcd tv, pctv where high b rightness, super wide viewing angle, high color gam ut, high color depth and fast response time are importa nt. cn1 (30pin) power circuit block source driver circuit s1 s1366 rgb tft - lcd panel (1366 768 x rgb pixels) [gate in panel] timing controller [lvds rx + odc + opc + sdram + spread spectrum integrated] back light assembly (12eefl) cn2, inverter (master, 14pin, high) +24.0v v br -a, ext.v br -b on/off ,status eeprom sda scl lvds 1port +12.0v lvds select #9 #27 vbr_b out #28 #10 opc en ext vbr -b general features viewing angle free ( r/l 178(min.), u/d 178(min.)) viewing angle (cr>10) 8bit, 16,7 m colors color depth 1366 horiz. by 768 vert. pixels rgb stripe arrangem ent pixel format 500 cd/m 2 (center 1 point) (typ.) luminance, white total 87.5watt (typ.) (logic=3.5 w, inverter= 84w [ vbr-a=1.65v] ) power consumption 5,7kg(typ.) weight transmissive mode, normally black display operating mode hard coating(3h), anti-glare treatment of the front polarizer (haze 10%) surface treatment 510.75 ? x 170.25 ? x rgb pixel pitch 760.0 mm(h) x 450.0 mm(v) x 48.0 mm(d) (typ.) outline dimension 31.51 inches(800.4mm) diagonal active screen size www..net www..net
product specification 5 / 41 lc320wxn ver. 1.0 table 1. absolute maximum ratings 2. absolute maximum ratings the following items are maximum values which, if ex ceeded, may cause faulty operation or damage to the lcd module. note 1. temperature and relative humidity range are shown in the figure below. wet bulb temperature should be max 39 c , and no condensation of water. 2. gravity mura can be guaranteed below 40 c condition. 90% 10 20 30 40 50 60 70 80 0 -20 0 10 20 30 40 50 dry bulb temperature [ c ] wet bulb temperature [ c ] storage operation humidity [(%)rh] 10% 40% 60% 60 brightness on/off v [dc] +5.0 0.0 v br note 1,2 c +50 0 t op operating temperature v [dc] 27.0 -0.3 v bl inverter lcd circuit unit %rh 90 10 h op operating ambient humidity %rh 90 10 h st storage humidity c +60 -20 t st storage temperature v [dc] +5.5 -0.3 v off / v on inverter control voltage at 25 2 c v [dc] +14.0 +8.0 v lcd power input voltage max min parameter remark value symbol www..net www..net
product specification 6 / 41 lc320wxn ver. 1.0 3. electrical specifications 3-1. electrical characteristics it requires two power inputs. one is employed to po wer for the lcd circuit. the other input power for the eefl/backlight is to power inverter. table 2. electrical characteristics note : 1. the specified current and power consumpti on are under the v lcd =12.0v, 25 2 c, f v =60hz condition whereas mosaic pattern(8 x 6) is displaye d and f v is the frame frequency. 2. the current is specified at the maximum current pattern. 3. the duration of rush current is about 2ms and ri sing time of power input is 0.5ms (min.). mosaic pattern(8 x 6) white : 255gray black : 0gray 1 ma 380 290 - 1 watt 5.16 3.5 - p lcd power consumption 3 a 3.0 - - i rush rush current v [dc] 13.2 12.0 10.8 v lcd power input voltage 2 ma 520 400 - i lcd power input current circuit : parameter symbol max typ min note unit value www..net www..net
product specification 7 / 41 lc320wxn ver. 1.0 table 3. electrical characteristics (continue) 100 ntsc 4 hrs 50,000 life time pulse duty level(pwm) (burst mode) pwm frequency for ntsc & pal high: lamp on low: lamp off vdc 5.0 - 2.5 high level lamp: vdc 0.8 - 0.0 low level power consumption ibl_b before aging ibl_a after aging power supply input current 3 min 3 ts discharge stabilization time brightness adjust v br-a = 3.3v 2 a 5.0 4.5 - v br-a = 3.3v 1 a 4 3.6 - v br-a = 1.65v 1 w 92.4 84 - pbl v br-a = 1.65v 1 a 3.85 3.5 - 5 hz 120 pal v br-a = 1.65v 2 a 4.5 4.0 - 1 v bl = 22.8v ext v br-b = 100% v br-a = 1.65v a 6.3 - - irush power supply input current (in-rush) on duty % 100 - 30 extv br-b inverter : vdc 3.3 1.65 0.0 v br-a brightness adjust input voltage for control system signals vdc 25.2 24.0 22.8 vbl power supply input voltage on/off off on vdc 5.0 - 2.5 v on vdc 0.8 0.0 -0.3 v off parameter symbol max typ min notes unit values notes : 1. electrical characteristics are determined after the unit has been on and stable for approximately 120 minutes at 25 2 c. the specified current and power consumption are under the typical supply input voltage 24vand v br ( v br-a : 1.65v & ext v br-b : 100%), it is total power consumption. the ripple voltage of the power supply input voltag e is under 0.5 vp-p. lgd recommend input voltage is 24.0v 5%. 2. electrical characteristics are determined within 30 minutes at 25 2 c. the specified currents are under the typical supply input voltage 24v. 3. the brightness of the lamp after lighted for 5mi nutes is defined as 100%. ts is the time required for the brightness of the c enter of the lamp to be not less than 95% at typica l current. the screen of lcd module may be partially dark by t he time the brightness of lamp is stable after tur n on. 4. specified values are for a single lamp which is aligned horizontally. the life time is determined as the time which lumin ance of the lamp is 50% compared to that of initial value at the typical lamp current (v br-a : 1.65v & extv br-b :100%), on condition of continuous operating at 25 2 c 5. lgd recommend that the pwm freq. is synchronized with two times harmonic of vsync signal of system. though pwm frequency is over 120hz (max 252hz), fun ction of inverter is not affected. 6. the duration of rush current is about 20ms. www..net www..net
product specification 8 / 41 lc320wxn ver. 1.0 3-2. interface connections this lcd module employs two kinds of interface conn ection, a 30-pin connector is used for the module e lectronics and 14-pin connector is used for the integral backlight system. 3-2-1. lcd module - lcd connector(cn1) : fi-x30ssl-hf (manufactured by jae) or is100-l30b-c23(manufactured by uju) - mating connector : fi-x30c2l (manufactured by jae) or equivalent table 4. module connector(cn1) pin configuration lvds receiver signal(+) rd+ 25 lvds receiver signal(-) rd- 24 ground gnd 23 lvds receiver clock signal(+) rclk+ 22 lvds receiver clock signal(-) rclk- 21 lvds receiver signal(-) rb- 15 ground gnd 14 lvds receiver signal(+) ra+ 13 lvds receiver signal(-) ra- 12 ground gnd 11 external vbr (from system) ext v br-b 28 ground gnd 29 ground gnd 30 power supply +12.0v v lcd 2 power supply +12.0v v lcd 3 power supply +12.0v v lcd 4 ground gnd 5 ground gnd 6 ground gnd 7 ground gnd 8 appendix vi, vii h =jeida , l or nc = vesa lvds select 9 appendix vi h = enable , l = disable opc_enable 10 lvds receiver signal(+) rb+ 16 ground gnd 17 lvds receiver signal(-) rc- 18 lvds receiver signal(+) rc+ 19 ground gnd 20 ground gnd 26 opc output (from lcm) opc out 27 note description symbol pin no. v lcd power supply +12.0v 1 notes : 1. all gnd(ground) pins should be connected togethe r to the lcd modules metal frame. 2. all vlcd (power input) pins should be connected t ogether. 3. all input levels of lvds signals are based on th e eia 644 standard. 4. specific pins (pin no. #10, #27~#28) are used for opc function of the lcd module. if not used, these pins are no connection. (please see the appendix vi for more information.) 5. specific pin no. #30 is used for no signal detection of system signal i nterface. it should be gnd for nsb(no signal black) during the system interface signal is not. if this pin is h, lcd module displays agp(auto generation pattern). www..net www..net
product specification 9 / 41 lc320wxn ver. 1.0 3-2-2. backlight inverter pin number of inverter connector pcb 14 1 master --inverter connector : 20022wr-14b1(yeonho) or equivalent - mating connector : 20022hs-14 or equivalent table 5. inverter connector pin configulation 2 analog dimming vbr-a 11 3 backlight on/off control v on/off 12 5 lamp status status 14 4 backlight ground gnd 7 backlight ground gnd 8 1 external pwm extvbr-b 13 backlight ground gnd 10 backlight ground gnd 9 backlight ground gnd 6 power supply +24.0v v bl 5 power supply +24.0v v bl 4 power supply +24.0v v bl 3 power supply +24.0v v bl 2 power supply +24.0v v bl 1 note description symbol pin no notes : 1. gnd should be connected to the lcd modu les metal frame. 2. minimum brightness : 0.0v / maximum brightness : 3.3v / open : 1.65v 3. on : 2.5 ~ 5.0v / off : 0.0 ~ 0.8v . open or h for b/l on is default status. 4. pin#13 can be opened. ( if pin #13 is open , e xtvbr-b is 100% ) please see appendix v for more information. . 5. normal : low (under 0.7v) / abnormal : high (upp er 3.0v) please see appendix v for more information. 6. each impedance of pin #11, 12 and 13 is 174 [k ? ] , 110 [k ? ] and 130 [k ? ]. www..net www..net
product specification 10 / 41 lc320wxn ver. 1.0 3-3. signal timing specifications table 6 shows the signal timing required at the inp ut of the lvds transmitter. all of the interface s ignal timings should be satisfied with the following spec ification for normal operation. note : 1. the input of hsync & vsync signal does not have an effect on normal operation(de only mode). if you use spread spectrum of emi, add some additio nal clock to minimum value for clock margin. 2. the performance of the electro-optical character istics may be influenced by variance of the vertica l refresh rate and the horizontal frequency 3. timing should be set based on clock frequency. table 6-1. timing table for ntsc [ de (data enable) only ] khz 50 47.4 45 f h frequency hz 63 60 57 f v frequency line 1063 790 776 t vt total line 295 22 8 t vt - t vv blank line - 768 - t vv valid vertical mhz 80.0 72.4 63.0 f clk dclk frequency nsec 15.8 13.8 12.5 t clk dclk period t clk - 1366 - t hv valid 1776 410 max. 1528 162 typ. 1456 90 min. notes unit symbol item t clk t ht total horizontal t clk t ht - t hv blank khz 50 47.4 45 f h frequency hz 53 50 47 f v frequency line 1063 948 776 t vt total line 295 180 8 t vt - t vv blank line - 768 - t vv valid vertical mhz 80.0 72.4 63.0 f clk dclk frequency nsec 15.8 13.8 12.5 t clk dclk period t clk - 1366 - t hv valid 1776 410 max. 1528 162 typ. 1456 90 min. notes unit symbol item t clk t ht total horizontal t clk t ht - t hv blank table 6-2. timing table for pal www..net www..net
product specification 11 / 41 lc320wxn ver. 1.0 0.7vdd 0.3vdd t clk invalid data valid data invalid data invalid data invalid data pixel 0,0 pixel 2,0 pixel 1,0 pixel 3,0 de(data enable) valid data 0.5 vdd t ht de(data enable) dclk first data second data de, data 3-4. signal timing waveforms t hv t vv t vt 1 768 www..net www..net
product specification 12 / 41 lc320wxn ver. 1.0 the brightness of each primary color(red,green,blue ) is based on the 8-bit gray scale data input for th e color. the higher binary input, the brighter the color. ta ble 7 provides a reference for color versus data in put. table 7. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) dark green 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green (001) ... ... ... ... 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (000) dark red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (001) ... ... ... ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 red (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red (255) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (001) ... ... ... ... 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (254) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (255) blue (000) dark white yellow magenta cyan blue (255) green (255) red (255) black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue m sb l sb green m sb l sb red m sb l sb b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data 3-5. color data reference www..net www..net
product specification 13 / 41 lc320wxn ver. 1.0 3-6. power sequence 3-6-1. lcd driving circuit note : 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply v lcd to 0v. 3. the t 3 / t 4 is recommended value, the case when failed to meet a minimum specification, abnormal display would be shown. there is no reliab ility problem. 4. if the on time of signals(interface signal and o ption signals) precedes the on time of power(v lcd ), it will be happened abnormal display. 5. t 6 should be measured after the module has been fully discharged between power off and on period. 4 ms - - 0 t 8 t 2 - 4 6 3 3 5 notes s - - 2.0 t 6 ms 0.5 t 7 ms - - 0.5 t 2 ms ms - - 200 t 3 - - 200 t 4 ms - - 0 t 5 ms 20 - 0.5 t 1 max typ min unit value parameter table 9. power sequence 10% 0v 90% 10% t 1 t 2 t 5 lamp on t 3 t 4 t 7 t 8 90% invalid data invalid data interface signal (tx) power for lamp power supply for lcd v lcd option signal (lvds_select) 0v valid data t 6 30% www..net www..net
product specification 14 / 41 lc320wxn ver. 1.0 3-6-2. sequence for inverter table 9. power sequence 3-6-3. deep condition for inverter v bl (typ) x 0.80 ms 10 - - t 6 2 ms - - 1000 t 7 - ms - - 10 t 5 2 ms 0 t 4 1 remarks ms - - 500 t 2 ms - - 200 t 3 ms - - 20 t 1 max typ min units values parameter v bl (typ.) x 0.8 0 v v bl : 24v t 6 power supply for inverter notes : 1. t 1 describes rising time of 0v to 24v and this paramet er does not applied at restarting time. 2. in t 4 section, ext-v br-b is not recommend 100%, but in t 7 section, ext-v br-b is certainly recommend 100% v on/off v bl 10% 0v 90% t 1 t 2 t 3 t 2 0.7v t 4 24v (typ.) t 5 lamp on t 7 1000ms (min) v br-a & extv br-b t 4 t 7 www..net www..net
product specification 15 / 41 lc320wxn ver. 1.0 lcd module optical stage(x,y) pritchard 880 or equivalent 50cm fig. 1 optical characteristic measurement equipment and method 4. optical specification optical characteristics are determined after the un it has been on and stable in a dark environment at 25 2 c. the values are specified at an approximate dista nce 50cm from the lcd surface at a viewing angle of and equal to 0 . it is presented additional information concerning t he measurement equipment and method in fig. 1. table 10. optical characteristics ta= 25 2 c , v lcd =12.0v, f v =60hz, dclk=72.4mhz, v br-a =1.65v, extv br - b =100% 4 ms 12 8 - g to g gray-to-gray 1200 900 3 1.3 5p white uniformity 5 ms 1 - - g to g response time 7 - - - gray scale 1 cr contrast ratio y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) - - 89 d - - 89 u - - 89 l 6 degree - - 89 r viewing angle (cr>10) white blue green red 0.603 gy 0.291 gx 0.061 by 0.146 bx 0.292 wy 0.279 wx 0.335 ry typ +0.03 0.636 typ -0.03 rx color coordinates [cie1931] luminance variation 2 cd/m 2 500 400 l wh surface luminance, white note unit max typ min value symbol parameter www..net www..net
product specification 16 / 41 lc320wxn ver. 1.0 table 11. gray scale specification note : 1. contrast ratio(cr) is defined mathematic ally as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at center 1-point. 2. surface luminance are determined after the unit has been on and 1 hour after lighting the backlight in a dark environment at 25 2 c. surface luminance is the luminance value at cen ter 1-point across the lcd surface 50cm from the surfac e with all pixels displaying white. for more information see the fig. 2. 3. the variation in surface luminance , white is defined as : white(5p) = maximum(l on1 ,l on2 , l on3 , l on4 , l on5 ) / minimum(l on1 ,l on2 , l on3 , l on4 , l on5 ) where l on1 to l on5 are the luminance with all pixels displaying white at 5 locations . for more information, see the fig. 2. 4. response time is the time required for the displ ay to transit from g(n) to g(m) (rise time, tr r ) and from g(m) to g(n) (decay time, tr d ). for additional information see the fig. 3. (n product specification 17 / 41 lc320wxn ver. 1.0 fig.3 response time response time is defined as the following figure an d shall be measured by switching the input signal f or gray(n) and gray(m). measuring point for surface luminance & luminance variation fig.2 5 points for luminance measure a : h / 4 mm b : v / 4 mm @ h,v : active area h a v b ? ? ? ? ? gray(m) gray(n) t r r t r d 100 90 10 0 optical response n,m = 0 gray (black)~255 gray (white), n product specification 18 / 41 lc320wxn ver. 1.0 fig.4 viewing angle dimension of viewing angle range normal y e = 0 , right = 180 , left = 270 , down = 90 , up www..net www..net
product specification 19 / 41 lc320wxn ver. 1.0 760.0mm horizontal outline dimension 392.256mm vertical 5.7 kg (typ.) , 6.0 kg (max.) weight 398.4mm vertical 450.0 mm vertical 48.0 mm depth 697.685mm horizontal active display area 703.8mm horizontal bezel area value item 5. mechanical characteristics table 12. mechanical characteristics note : 1.please refer to a mechanical drawing in te rms of tolerance at the next page. table 12 provides general mechanical characteristic s. www..net www..net
product specification 20 / 41 lc320wxn ver. 1.0 www..net www..net
product specification 21 / 41 lc320wxn ver. 1.0 www..net www..net
product specification 22 / 41 lc320wxn ver. 1.0 6. reliability table 13. environment test condition ta= 40 c ,90%rh humidity condition operation 7 0 - 15,000 ft 0 - 40,000 ft altitude operating storage / shipment 8 shock level : 100grms waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non-operating) 6 wave form : random vibration level : 1.0grms bandwidth : 10-300hz duration : x,y,z, 30 min each direction per 10 min vibration test (non-operating) 5 ta= 0 c 240h low temperature operation test 4 ta= 50 c 50%rh 240h high temperature operation test 3 ta= -20 c 240h low temperature storage test 2 ta= 60 c 240h high temperature storage test 1 condition test item no. note : before and after reliability test, lcm sho uld be operated with normal function. www..net www..net
product specification 23 / 41 lc320wxn ver. 1.0 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) cispr13 "limits and methods of measurement of r adio interference characteristics of sound and television broadcast receivers and associated e quipment" cispr22 "limits and methods of measurement of radi o interference characteristics of information technology equipment" international special commit tee on radio interference. c) en55013 "limits and methods of measurement of ra dio interference characteristics of sound and television broadcast receivers and associated equip ment" en55022 "limits and methods of measurement of radio interference characteristics of information technology equipment" european committee for elect ro technical standardization.(cenelec), 1988(including a1:2000) a) ul 60065, 7 th edition, dated june 30, 2003, underwriters laborato ries, inc., standard for audio, video and similar electronic ap paratus. b) can/csa c22.2, no. 60065:03, canadian standards association, standard for audio, video and similar electronic ap paratus. c) iec60065:2001, 7 th edition cb-scheme and en 60065:2002, safety requirements for audio, video and similar el ectronic apparatus.. www..net www..net
product specification 24 / 41 lc320wxn ver. 1.0 8-2. packing form 8. packing 8-1. information of lcm label a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. a) package quantity in one box : 24 pcs b) pallet size :1030 mm(l) x 870 mm(w) x 1210 mm(h) www..net www..net
product specification 25 / 41 lc320wxn ver. 1.0 please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using specified mountin g holes (details refer to the drawings). (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzine. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. * there is no problem of panel crack under 5kgf / 1 0mm (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions 9. precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becomes longer (4) be careful for condensation at sudden temperatu re change.condensation makes damage to polarizer or electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shal l be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoust ical impact to lcm. otherwise, lcm cant be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw. (if not, it can causes conductive particles and dea l lcm a fatal blow) (9) please do not set lcd on its edge. (10) it is recommended to avoid the signal cable an d conductive material over the inverter transformer for it can cause the abnormal display and temperatu re rising. (11) partial darkness may happen during 3~5 minutes when lcm is operated initially in condition that luminance is under 40% at low temperature (under 5 ). this phenomenon which disappears naturally after 3~5 minutes is not a problem about reliabili ty but lcd characteristic. www..net www..net
product specification 26 / 41 lc320wxn ver. 1.0 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the te mperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. 9-5. storage 9-6. handling precautions for protection film (1) the protection film is attached to the bezel wi th a small masking tape . when the protection film is peeled off, static elec tricity is generated between the film and polarizer . this should be peeled off slowly and carefully by p eople who are electrically grounded and with well i on- blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the p rotection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel surface or its vestige is recog nized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with norma l- hexane. www..net www..net
product specification 27 / 41 lc320wxn ver. 1.0 required signal assignment for lvds transmitter ( p in9=l ) note: 1. the lcd module uses a 100 ohm[ ] resistor between positive and negative lines of e ach receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible) 3. 7 means msb and 0 means lsb at r,g,b pixel dat a. red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31 ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module gnd gnd # appendix-i-1 www..net www..net
product specification 28 / 41 lc320wxn ver. 1.0 required signal assignment for lvds transmitter ( p in9=h ) note: 1. the lcd module uses a 100 ohm[ ] resistor between positive and negative lines of e ach receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible) 3. 7 means msb and 0 means lsb at r,g,b pixel dat a. red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module vcc gnd 50 2 51 52 54 55 56 3 8 10 4 6 7 11 12 14 16 18 15 19 20 22 23 24 27 28 30 31 # appendix-i-2 www..net www..net
product specification 29 / 41 lc320wxn ver. 1.0 LC320WXN-SBA3 C packing assy # appendix-ii paper_dw3 box 6 opp 70mmx300m tape 7 yupo paper 100x100 label 8 eps packing, top r_l 5 eps packing, bottom 4 masking 20mm x 50m tape 3 al bag 2 lcd module 1 material description no. www..net www..net
product specification 30 / 41 lc320wxn ver. 1.0 LC320WXN-SBA3 C pallet assy # appendix-ii box quantity per pallet: 4ea pallet size: l1030 x w870 x h1210 paper label 6 paper (swr4) angle, packing 5 steel clip, band 4 pp band 3 plywood pallet 2 packing assy 1 material description no. www..net www..net
product specification 31 / 41 lc320wxn ver. 1.0 lcm label # appendix- iii lc320wxn lc320wxn lc320wxn lc320wxn (sb)(a3) (sb)(a3) (sb)(a3) (sb)(a3) model serial no. ul, tuv mark lgd logo us patent no. origin 8 serial no. (see cas 24page for more information) 1 2 3 4 5 6 7 9 10 11 12 inch m assy factory code serial no. 13 month year www..net www..net
product specification 32 / 41 lc320wxn ver. 1.0 pallet label # appendix- iv lc320wxn sba3 24 pcs 001/01-01 made in korea rohs verified xxxxx xxxxxxxx xxx xxx xxxx box label lc320wxn sba3 6 pcs korea www..net www..net
product specification 33 / 41 lc320wxn ver. 1.0 ? when opc enable is l", opc output = system dimming . opc output( pwm signal) is synchronized with v-sync freq. of system in t-con board. ? regardless of opc, system should always give dimmin g signal (extvbr-b) to t-con. ? pwm specification ( vdd = 3.3v ) @ opc 1. pwm high voltage range : 2.5v~3.6v 2. pwm low voltage range : 0.0v~0.8v max 10.0 s falling time max 10.0 s rising time max 1khz (recommendation:50~200hz) input frequency vdd*0.9 vdd*0.1 rising time falling time vdd 0 # appendix- v-1 inverter 13 th pin (extvbr-b) design guide system system system system lcm lcm lcm lcm master master master master inverter inverter inverter inverter 14 1414 14 1 11 1 30 3030 30 #1 #1#1 #1 nc / 1.65v nc / 1.65v nc / 1.65v nc / 1.65v v vv v br brbr br - -- -a aa a vbr vbr vbr vbr- -- -b pwm b pwm b pwm b pwm ( async. or sync.) ( async. or sync.) ( async. or sync.) ( async. or sync.) #10 : opc enable pin #10 : opc enable pin #10 : opc enable pin #10 : opc enable pin 13 1313 13 11 1111 11 3.3v 3.3v 3.3v 3.3v opc off opc off opc off opc off opc on opc on opc on opc on #28 : vbr #28 : vbr #28 : vbr #28 : vbr- -- -b input b input b input b input #27 : opc #27 : opc #27 : opc #27 : opc- -- -out out out out lcm control board lcm control board lcm control board lcm control board t-con www..net www..net
product specification 34 / 41 lc320wxn ver. 1.0 # appendix- v-2 - purpose : preventing of backlight off by restartin g the inverter technically - how to : when inverter is abnormal operation, tv system inputs the von signal in the inverter once more to turn on the lamp safel y - attention : restart systems von signal when statu s pin is high for some time(min:1sec, max:4sec) (the turn on time of lamp can be late such as the l ow temperature or the storage time) - purpose : preventing of backlight off by restartin g the inverter technically - how to : when inverter is abnormal operation, tv system inputs the von signal in the inverter once more to turn on the lamp safel y - attention : restart systems von signal when statu s pin is high for some time(min:1sec, max:4sec) (the turn on time of lamp can be late such as the l ow temperature or the storage time) function of status pin system von status level low system von lamp turn on status operation modes in tv set status operation modes in tv set normal mode fail of lamp turn on again system von status level high feedback to system lamp turn on status operation mode inv. description symbol pin no vbr-a analog dimming voltage dc 0.0v ~ 3.3v (typ : 1.65v) vbr-a 11 on/off 0.0v ~ 5.0v von/off 12 status normal : under 0.7v abnormal : upper 3.0v status 14 external pwm burst dimming control pwm signal input extvbr-b 13 inverter pin map inverter pin map inverter 14 th pin (status) design guide lamp on v on restart v on status v on/off [12pin] backlight status [14pin] system inverter fail 1sec ~4sec more than 0.1sec www..net www..net
product specification 35 / 41 lc320wxn ver. 1.0 # appendix- vi circuit block diagram of lvds format selection pin option pin circuit block diagram asic (tcon) 50k ? ?? ? system side lcm side lvds select (pin 9) lvds select 1k ? ?? ? lvds select pin : pin 9 circuit block diagram of opc enable selection pin asic (tcon) lcm side opc_enable 1k ? ?? ? vcc open system side 50 k ? ?? ? opc_enable (pin 10) r1 opc enable pin : pin 10 r1 ? 1k ? ?? ? www..net www..net
product specification 36 / 41 lc320wxn ver. 1.0 # appendix- vii-1 lvds input characteristics 1. dc specification 2. ac specification - v 1.8 0.7 v in lvds input voltage range - mv 250 v cm change in common mode voltage - v 1.5 1.1 v cm lvds common mode voltage - mv 600 200 |v id | lvds single end voltage notes unit max min symbol description 20% 80% a t rf lvds data t skew lvds clock t clk ( f clk = 1/t clk ) t skew a - ps 360 t eff effective time of lvds notes unit max min symbol description - ps |(0.25*t clk )/7| t skew lvds clock to data skew margin 2 260 ps (0.3*t clk )/7 t rf lvds clock/data rising/falling time notes : 1. all input levels of lvds signals are bas ed on the eia 644 standard. 2. if t rf isnt enough, t eff should be meet the range. www..net www..net
product specification 37 / 41 lc320wxn ver. 1.0 # appendix- vii-2 v+ data v- data vcm tui 0.5tui 360ps 360ps vid tui : unit interval teff v+ clk v- clk vcm lvds input characteristics www..net www..net
product specification 38 / 41 lc320wxn ver. 1.0 # appendix- viii lvds select : h data-mapping (jeida format) lvds select : l data-mapping (vesa format) r17 r16 r15 r14 g12 r13 r12 r12 r13 g12 b12 g17 g16 g15 b13 g14 g13 g13 g14 b13 v sync h sync b17 b16 de b15 b14 b14 b15 de b11 b10 g11 g10 x r11 r10 r10 r11 x rclkp rclkm rap rbp rcp rdp r15 r14 r13 r12 g10 r11 r10 r10 r11 g10 b10 g15 g14 g13 b11 g12 g11 g11 g12 b15 v sync h sync b15 b14 de b13 b12 b12 b13 de b17 b16 g17 g16 x r17 r16 r16 r17 x rclkp rclkm rap rbp rcp rdp lvds data-mapping info. (8bit) www..net www..net
product specification 39 / 41 lc320wxn ver. 1.0 # appendix- ix mega dcr using condition(1) 2) low duty(0%~20%) of the inverter output current, b/l may not satisfy some of lcm specification. - duration : the low duty operation(0 ~ 20%) must b e limited within 10 minutes for one time operation. - ratio : the period of the low duty operation must be less than 1/5 compare to that of the high duty operation(20~100%) in a certain period to prevent u nwanted operation. - fos : partial darkness or darkness of center are a during the low duty might be happened due to insufficient lamp current. - warm up : the low duty must be used 3 min after th e lamps on. in case of low temperature, more warm up time may be needed. the deep dimming must be used very carefully due to limitation of lamp characteristics and specificati on. 1) for stable lamp on, its duty condition should fo llow below the condition. after inverter on signal, t0 duration should be sus tained. after inverter on signal, pwm duty 100% should be s ustained during 2sec. it is recommended not to sustain more than 10 min f or deep dimming (low duty of the inverter output current 0%~20%). (about the input pwm duty see the table 3 on the p age 7 (min duty)). t0 = min 2 [sec] pwm high duty(20% ~100%) pwm duty 100% min 3[min] output current output current output current output current inverter on signal inverter on signal inverter on signal inverter on signal lamp on lamp on lamp on lamp on www..net www..net
product specification 40 / 41 lc320wxn ver. 1.0 # appendix- ix note unit value parameter pwm high duty[20~100%] min - - t2 x 5 t3 pwm low duty[0~20%] min 10 - - t2 pwm high duty[20~100%] min - - 3 t1 max typ min t2 t3 t1 t2 output current output current output current output current 3) the output current duty may not be same as input pwm duty due to rise/fall time of output. 4) following the recommended conditions as aforemen tioned, there is no difference of lamp lifetime between conventional method and new one. t0 mega dcr using condition(2) www..net www..net
product specification 41 / 41 lc320wxn ver. 1.0 # appendix- x this is only the reference data of g to g and unifo rmity for LC320WXN-SBA3 model. 1. g to g response time : response time is defined as figure3 and shall be m easured by switching the input signal for gray (n) and gray(m).(32gray step at 8bit) 2. g to g uniformity the variation of g to g uniformity , g to g is defined as : *maximum (gtog) means maximum value of measured tim e (n, m = 0 (black) ~ 255(white), 32 gray step). 3. sampling size : 2 pcs 4. measurement method : follow the same rule as opt ical characteristics measurement. 5. current status below table is actual data of production on 02.14. 2009 ( lgd rv event sample) gray to gray response time uniformity trr:0g 225g trr:0g 223g trr:0g 64g trr:0g 32g 0gray trd:255g 0g trd:223g 0g trd:64g 0g trd:32g 0g 0gray trd:255g 223g trd:255g 64g trd:255g 32g 255gray trr:223g 255g trd:223g 64g trd:223g 32g 223gray trr:64g 255g trr:64g 223g trd:64g 32g 64gray trr:32g 255g trr:32g 223g trr:32g 64g 32gray 255gray 223gray 64gray 32gray 6.0 6.6 min. 11.3 11.3 max. g to g response time [ms] 0.662 0.587 uniformity # 2 # 1 g to g uniformity = 1 ) ( ) ( ) ( gtog typical gtog typical gtog maximum ? www..net www..net

▲Up To Search▲

Price & Availability of LC320WXN-SBA3

	To Download LC320WXN-SBA3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .